Home Chemicals MSDS Contact     Member of Since 1993	Chemicals   BIO-2 BIO-2 Biodegradable Ink Remover Description BIO-2 is a revolutionary new biodegradable ink remover designed for rapid, safe removal of screen printing inks and remaining ghost image. BIO-2 is very aggressive while safe for the user and the mesh. Advantages Biodegradable Drain Safe Fast and Economical Not SARA Reportable Non Toxic Availability Packaged in 5, 30 and 55 gallon sizes. Application Spray, wipe or brush BIO-2 on the ink side of the screen. Agitate the ink to allow for deeper penetration. Rinse with a cold water pressure rinse. If ghost image remains, reapply BIO-AP to both sides of screen and brush affected areas. Allow to stand for 5 to 10 minutes and rinse remaining image away using high pressure. First Aid External: Rinse skin with water. Flush eyes with large amounts of water for at least 15 minutes occasionally opening eyelids to ensure thorough irrigation; contact a physician. Always remove contact lenses prior to using any chemicals. Remove and wash contaminated items before reuse. Internal: If ingested do not induce vomiting. Immediately drink two large glasses of water and contact a physician.   Sundry-Tech believes that the data contained herein are accurate. The data are not to be taken as a warranty or representation for which Sundry-Tech assumes legal responsibility. They are offered for your consideration, investigation and verification. Any use of these data and information sheets must be determined to be in accordance with applicable Federal, State and Local laws and regulations.