Home Chemicals MSDS Contact     Member of Since 1993	Chemicals   ER-288 ER-288 Emulsion Remover Concentrate Description ER-288 is a concentrated formulation designed for fast removal of emulsions and capillary films from screens by means of spray-on application. Advantages Dilute with water to achieve desired results Fast Removal of Hardened Emulsion Drain Safe Economical Ecologically Sound Availability Concentrated liquid: 5, 15, 30 and 55 gallon sizes. Application Full strength liquid: Remove all ink from screen with a compatible, non-film forming ink remover, such as BIO-2. Spray ER-288 in a uniformly applied pattern working from bottom to top on the print contact side of the screen. In some cases, better results are obtained by applying ER-288 to both sides of the screen. Allow to stand for 1 to 3 minutes depending on the type of hardness of the emulsion used. Remove emulsion residue using a medium pressure, low volume cold water rinse. Allow screen to dry completely before recoating. To Dilute: In a plastic container, mix ER-288 with water until required strength is achieved. Follow instructions for full strength liquid. First Aid External: On skin, rinse skin with water. Remove and wash contaminated items before reuse. In eyes, flush eyes with large amounts of water for at least 15 minutes occasionally opening eyelids to ensure thorough irrigation; contact a physician. Always remove contact lenses prior to using any chemicals. Internal: If ingested, induce vomiting immediately and pump out stomach if necessary. Contact a physician.   Sundry-Tech believes that the data contained herein are accurate. The data are not to be taken as a warranty or representation for which Sundry-Tech assumes legal responsibility. They are offered for your consideration, investigation and verification. Any use of these data and information sheets must be determined to be in accordance with applicable Federal, State and Local laws and regulations.