Home Chemicals MSDS Contact     Member of Since 1993	Chemicals   ProClean Plus ProClean Plus Description An economical ink remover which works great on all types of ink. ProClean Plus was formulated to be earth-friendly, it is biodegradable, non-hazardous and has a low VOC level. ProClean Plus is made with a powerful combination of organic solvents that act quickly to remove ink build up, grease and oil. ProClean Plus does not require scrubbing. This formula is sprayed or wiped on and dries quickly. Directions Spray ProClean Plus on to ink side of the screen. Agitate ink with brush to loosen. Allow to stand for 1-3 minutes. Ink is then easily removed with a high pressure rinse. If ghost remains, apply ProClean Plus to both sides of screen with spray or brush. Agitate affected area with brush and allow to stand. Haze is then easily removed with high pressure rinse. Typical Product Characteristics Appearance: clear, yellow liquid Order: citrus scented pH: NA Flash Point: 114 F Specific Gravity: 0.96 Stability: stable VOC: 422 g/L First Aid External: On skin, rinse skin with water. Remove and wash contaminated items before reuse. In eyes, flush eyes with large amounts of water for at least 15 minutes occasionally opening eyelids to ensure thorough irrigation; contact a physician. Always remove contact lenses prior to using any chemicals. Internal: If ingested, do not induce vomiting. Immediately give two large glasses of water and contact a physician. Keep person warm, quiet and calm until help arrives.   Sundry-Tech believes that the data contained herein are accurate. The data are not to be taken as a warranty or representation for which Sundry-Tech assumes legal responsibility. They are offered for your consideration, investigation and verification. Any use of these data and information sheets must be determined to be in accordance with applicable Federal, State and Local laws and regulations.